Construction Plans for Electromedicine
Devices
The following construction plans are available for $5 each via pdf files
or Microsoft Word document files. They include either schematics or drawings (of
the actual parts and how they connect to each other) and parts lists &
sources. The devices are purely experimental. We make no health claims
concerning them.
Construction Plans
Blood Electrifier, two
plans are included. One is super simple and uses only three batteries as its
power source and is a DC current unit. The second one is with controllable
output current at AC line frequency (50 or 60 hz) or at DC current (selectable
by switch). US Patent 5,139,684 (of Kaali & Schwolsky 8-18-92) proposed
using small bio-compatible amounts of electricity on the blood to deactivate all
virus, bacteria, fungi, parasites therein. They made this patent after seeing a
98% deactivation of HIV in a test tube that was subjected to small amounts of
electricity. (see experiments.html) Sine wave
output. Powered by AC adaptor. Realistic drawing of
AC/DC unit showing parts connections, not just a schematic. (only 9 electronic
parts so anyone can construct it)
Beck style Magnetic
Pulser, made via these plans, is a device to accompany treatment of the
blood with electricity. It delivers a strong momentary unipolar magnetic pulse
every 4 seconds which penetrates into surrounding tissues (within 4" of the
center of the coil). According to Patent 6,675,047 (Electromagnetic-Field
Therapy Method and Device) "pulsed [electromagnetic] field therapy produces a
complex effect on the living organism, because it contributes to an improvement
in the energy metabolism, increases the mobility of lymph, enhances the blood
supply of capillaries, and, as a consequence, improves nutrition of all tissues
of the organism. The pulse field therapy liquidates stagnation of energy in
tissues, whereby painful sensations are eliminated." Powered by AC adaptor. 32K
gauss magnetic output. Powered by 450 volts, more than the commonly used 350
volts. only 18 parts. relatively easy. Realistic
drawing showing parts connections, not just a schematic. Soldering required.
Parts available online.
Magnetic Multi-Pulser, outputs a single
burst of declining strength oscillating magnetic field pulses every 1½ second.
Powered by AC adaptor. Output magnetic field strength of 1 Tesla. Very similar
multiple oscillating magnetic field outputs were described in patent 4,524,079
as being effective against bacteria and fungus in lab tests. In patent 4,665,898
an oscillating magnetic field (OMF) was described as being effective against
beginning rat cancer tumors. Other reports (Science News, etc) have stated the
beneficial effects of OMF against inflammation and pain. 19 parts. Soldering
required. Parts available online. Realistic
drawing showing parts connections, not just a schematic. The vendor changed
their high voltage supply.
Rife Frequency Amplifier, made via
these plans, is an amplifier that can be used to amplify the signals from any
TTL output (square wave, 0-5 volts) frequency generator (BK4001A from DigiKey or
some computers audio output) for applying frequencies to the body via wetted
cloth pads. Output is a variable voltage (maximum of 30) dual polarity square
wave to wet pad electrodes. This unit has an internal TTL preamp which is
necessary to convert the sloppy output signal from the computer into a clean
square wave which is then further amplified into a 60 volt peak-to-peak AC
signal at the output. The output signals rise time is a fast 4.4 micro-seconds.
It uses four 9 volt alkaline batteries. Approximate battery life when using it 1
hour daily is 2 weeks. (33 parts)
EMEM2
(Electro Magnetic Experimental Machine 2), a dual output (contact with wet
pad electrodes or non-contact with light waves) Rife frequency generator device.
8 to 30,000 hertz frequency output. Powered by AC adaptor. (33 parts) schematic
only. FREE! Now I am giving away this one,
at no charge, so that you can see what to expect in these plans. This is the
most complex set of plans I have. Click here
to see it as a pdf file.
Cranial Electro-Stimulator (CES),
outputs a mixed frequency signal via wet electrodes to the ear lobes to
electrically stimulate the brain for less anxiety, deeper sleep, less
depression. Powered by rechargeable 9 volt battery. (47 parts)
Skin Electrifier, outputs a milliampere DC current to skin
between its wet cloth covered electrodes for experimental treatment of herpes
sores. Powered by a 9 volt battery. (5 parts)
Infra-Red
Relaxer, made via these plans, is a unit that outputs both infrared and red
light via light emitting diodes switched on and off at 80 hz. Nothing is felt
from it at all other than a slight warmth. According to one scientific research
report (ISBN: 0-8194-1500-6) blood exposed to infrared light had less blood cell
aggregation (clumping together) which would free up more surface area of red
blood cells to transfer nutrients and oxygen to tissues. This and other reasons
is why light therapy is effective against balding. ( Click here)
Powered by AC adaptor. Two plans are presented, one of 17 parts and a second
plan for making a super simple version of this which outputs red and infrared
light (via 1 red diode and 3 infrared diodes) at 60 hz and with only 9 parts.
This second one is a very easy circuit to solder together.
These
construction plans are as simple as possible but only the plans for the Blood
Electrifier, both Pulsers, InfraRed Relaxer, and Skin Electrifier are truly
easy. If you are inexperienced with soldering electronic parts together then you
may want to hand the parts and the plans over to a radio/TV repair technician to
assemble the devices for you.
Online soldering tutorials for
beginners:
http://www.epemag.wimborne.co.uk/solderfaq.htm#howto
http://www.epemag.wimborne.co.uk/desolderpix.htm
http://www.epemag.wimborne.co.uk/solderpix.htm
For
a soldering iron I recommend a dual output (20/40 watt) one, # 64-2184, for $23
from Radio Shack. A good cheap .05" diameter solder is available from Radio
Shack (locally or online at www.radioshack.com, #64-015) for $3.