The H3O
Starter Kit
Starter Kit
Our H3O Starter Kit
(picture at right) has everything you need
to take advantage of numerous applications our "H3O Hydronium
Preparation": an 8 fl. oz. concentrate (makes 7 to 10 gallons
of Usable H3O at pH 1.6-2.0, depending on the pH and purity of
your "base water"); two empty "mixing containers," a 4 fl. oz.
spray bottle for disinfecting and light mist applications, and
a 4 fl. oz. medical application bottle with dropper; plus, a set
of 100 non-bleeding pH indicator strips, for pH calibration
purposes. 
The starting point for
all H3O preparations is your "base water" -- the water to which
you will add H3O concentrate in making a "final preparation."
You should use either distilled or reverse-osmosis ("RO")
filtered water. A good starting point is one fluid ounce
(1 fl. oz.) of H3O Concentrate to one gallon of water.
This "general purpose"
solution, with its 1:129 ratio, should put you in the 1.6
range. If your pH is higher (i.e. 1.8), you simply add
more H3O concentrate (use the enclosed dropper). If your
pH is more acidic (i.e. 1.4), you just add more water.If you read the comments
from our lab notes, you will note that most users went with
a pH of 2.0 for most applications, such as disinfecting
and mouthwash. Even though this product
has been under constant research since 1996, we are still
learning more and more about its uses, and you may well
uncover a use we haven't discovered yet - (and if you do,
we hope you email us, so we can
share your findings with other users). Once you get the
right pH for the product, you can dispense this preparation
from a larger mixing container (such as a plastic, one-gallon
water bottle) into one of two dispensing containers
enclosed with your Kit. Make sure that you take a pen
and mark the pH of this solution in the blank provided.
The spray and dropper bottles provide for easy dispensing
for some of the most common applications of H3O: spraying
for disinfecting surfaces, oral and skin
applications, etc.; the amber glass
bottle and dropper serve applications where you want to
regulate, per drop, the amount of product used. Email us
with any information requests on this product. 
